Dieses Bild zeigt Kim Werkle

Kim Werkle

Herr M. Sc.

Gruppenleiter Maschinenkonstruktion
Institut für Werkzeugmaschinen
Maschinenkonstruktion

Kontakt

+49 711 685 84558
 +49 711 685 70040

Holzgartenstr. 17
70174 Stuttgart
Deutschland
Raum: 3.013

  1. 2025

    1. Engert, M., Frankenbach, K., Werkle, K. T., & Möhring, H.-C. (2025). Simulation of the flexural behavior of prestressed fiber-reinforced polymer concrete. The International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-025-15653-1
    2. Feng, Q., Werkle, K. T., Maier, W., & Möhring, H.-C. (2025). Intelligent soft jaws for clamping complex geometric surfaces using active-controlled MRF in a 3D-printed TPU-cushion. Production Engineering. https://doi.org/10.1007/s11740-025-01336-z

  2. 2024

    1. Wolf, J., Werkle, K. T., & Möhring, H.-C. (2024). Study on Dynamic Behaviour in FFF 3D-printing with Crossed Gantry Kinematic. Procedia CIRP, 121, 162–167. https://doi.org/10.1016/j.procir.2023.09.244

  3. 2021

    1. Maucher, C., Werkle, K. T., & Möhring, H.-C. (2021). In-Situ defect detection and monitoring for laser powder bed fusion using a multi-sensor build platform. Procedia CIRP, 104, 146–151. https://doi.org/10.1016/j.procir.2021.11.025

  4. 2020

    1. Häusler, A., Werkle, K. T., Maier, W., & Möhring, H. C. (2020). Design of Lightweight Cutting Tools. International Journal of Automation Technology, Vol. 14, Article No. 2. https://doi.org/10.20965/ijat.2020.p0326
    2. Möhring, H.-C., Werkle, K., & Maier, W. (2020). Process monitoring with a cyber-physical cutting tool. Procedia Cirp, Vol. 93, 1466–1471. https://doi.org/10.1016/j.procir.2020.03.034
    3. Werkle, K. T., Maier, W., Mayer, S., & Möhring, H.-C. (2020). Additive manufacturing of sensors - printing of conductor paths in loaded structures. Euspen’s 20th International Conference & Exhibition, 20155, 4. https://www.euspen.eu/resource/additive-manufacturing-of-sensors-printing-of-conductor-paths-in-loaded-damping-structures/

  5. 2019

    1. Werkle, K. T., Maier, W., & Möhring, H.-C. (2019). Additive manufacturing for intelligent lightweight tools. In J. P. Wulfsberg, W. Hintze, & BA. Behrens (Eds.), Production at the leading edge of technology (pp. 269–275). Springer Vieweg. https://doi.org/10.1007/978-3-662-60417-5_27

  6. 2018

    1. Maier, W., Möhring, H.-C., & Werkle, K. (2018). Tools 4.0 – Intelligence starts on the cutting edge. Procedia Manufacturing, 24 (2018), Article 24 2018. https://doi.org/10.1016/j.promfg.2018.06.024
    2. Möhring, H.-C., Maier, W., & Werkle, K. (2018). Increasing the Accuracy of an Intelligent Milling Tool with Integrated Sensors. european society for precision engineering and nanotechnology, 18th International Conference & Exhibition.
Zum Seitenanfang