Dieses Bild zeigt Michael Storchak

Michael Storchak

Herr Dr. Sc.

Akademischer Mitarbeiter
Institut für Werkzeugmaschinen
Zerspanungstechnologie

Kontakt

+49 711 685 83831
 +49 711 685 70040

Holzgartenstr. 17
D-70174 Stuttgart
Deutschland
Raum: U1.110

Publikationen:

  1. 2019

    1. Braun, S., Storchak, M., & Möhring, H.-C. (2019). Using model based analytic cutting force prediction in CAM toolpath generation. Procedia CIRP, Volume 82, Pages 467-472. https://doi.org/10.1016/j.procir.2019.04.003
    2. Storchak, M. (2019). Optimization of Geometrical Engagement Parameters for Gear Honing. (S. P. Radzevich, Hrsg.). CRC Press, Taylor & Francis Group. https://doi.org/10.1201/9781351049832-2
    3. Storchak, M., & Danylchenko, Y. (2019). Determination of geometrical parameters of the diamond gear hones for the finishing of gears. Mechanics and Advanced Technologies, Vol. 86(No. 2), Article No. 2. https://doi.org/10.20535/2521-1943.2019.86.186052
    4. Storchak, M., & Danylchenko, Y. (2019). Elaboration of principles for developing technological systems for the finishing of gears. Mechanics and Advanced Technologies, Vol. 85(No. 1), Article No. 1. https://doi.org/10.20535/2521-1943.2019.85.154822

  2. 2018

    1. Babichev, D., & Storchak, M. (2018). Quality characteristics of gearing. Advanced Gear Engineering, Mechanisms and Machine Science, 51, Article 51.
    2. Storchak, M., Zakiev, I., & Träris, L. (2018). Mechanical Properties of Subsurface Layers in the Machining of Titanium Alloy Ti10V2Fe3Al. Journal of Mechanical Science and Technology, 32 (1), Article 32 (1).
    3. Möhring, H. C., Kushner, V., Storchak, M., & Stehle, T. (2018). Temperature calculation in cutting zones. CIRP Annals (on-line).

  3. 2017

    1. Kushner, V., & Storchak, M. (2017). Determination of Material Resistance Charakteristics in Cutting. Procedia CIRP, 58, Article 58.
    2. Kushner, V., & Storchak, M. (2017). Modelling the material resistance to cutting. Internationnal Journal of Mechanical Sciences, 126, Article 126.
    3. Storchak, M., & Diemer, F. (2017). Simulation of the orthogonal cutting processwith LS-Dyna - Comparison of Lagrangian-, Eulerian- and SPH cutting models Simulation des orthogonalen Zerspanens mit LS-Dyna: Vergleich des Einsatzes von Lagrange’schen-, Euler’schen- und SPH-Zerspanmodellen. wt-inline, 1/2, Article 1/2.

  4. 2016

    1. Krivosheva, A., Danilchenko, J., Storchak, M., & Pasternak, S. (2016). Design of shaping machine and tooling systems for gear manufacturing. Theory and Practice of Gearing and Transmissions, 34, Article 34.
    2. Storchak, M., Jiang, L., Xu, Y., & Li, X. (2016). Finite element modeling for the cutting process of the titanium alloy Ti10V2Fe3Al. Production Engineering, 10(4–5), Article 4–5. http://dblp.uni-trier.de/db/journals/peng/peng10.html#StorchakJXL16

  5. 2015

    1. Tsekhanov, J., & Storchak, M. (2015). Development of analytical model for orthogonal cutting. Production Engineering, 9(2), Article 2.
    2. Babichev, D. A., & Storchak, M. (2015). Synthesis of cylindrical gears with optimum rolling fatigue strength. Production Engineering, 9(1), Article 1.

  6. 2014

    1. Babichev, D. A., Storchak, M., & Babichev, D. T. (2014). Geometrical Synthesis and Computer Investigation of Equal Strength Spur Gears. Proceedings of International Symposium ``Theory and Practice of Gearing’’, 309--315.
    2. Kushner, V., & Storchak, M. (2014). Determining mechanical characteristics of material resistance to deformation in machining. Production Engineering, 8(5), Article 5.
    3. Olenin, L. D., Storchak, M., & Lekveishvili, M. A. (2014). To develop an analytical model oblique cutting. Proceedings of the MSTU \dqMAMI\dq Series \dqMechanical Engineering and Materials\dq, 19(1–2), Article 1–2.
    4. Danilchenko, Y., Krivosheya, A. V., & Storchak, M. (2014). Design of Shaping Machine and Tooling Systems for Gears Manufacturing. Proceedings of International Symposium ``Theory and Practice of Gearing’’, 484--489.

  7. 2013

    1. Abele, E., Aurich, J. C., Behrens, B.-A., Biermann, D., Brecher, C., Brinksmeier, E., Czora, M., Denkena, B., Engel, U., Großmann, K., Heisel, U., Heinisch, D., Hermes, R., Kirsch, B., Klocke, F., Krause, A., Kroiß, T., Laurischkat, R., Löser, M., … Weiß M. (2013). Measurement and Test Techniques. In B. Denkena & F. Hollmann (Hrsg.), Process Machine Interactions (S. 3--27). Springer-Verlag.
    2. Eberhard, P., Heisel, U., Storchak, M., & Gaugele, T. (2013). Dynamics and thermal interactions in metal cutting. In B. Denkena & F. Hollmann (Hrsg.), Process Machine Interactions (S. 309--328). Springer-Verlag.
    3. Heisel, U., Storchak, M., & Krivoruchko, D. V. (2013). Thermal effects in orthogonal cutting. In Production Engineering 7 (S. 203--211).
    4. Heisel, U., Zaloha, V. A., Krivoruchko, D. V., Storchak, M., & Goloborodko, L. V. (2013). Modelling of Orthogonal Cutting Processes with the Method of Smoothed Particle Hydrodynamics. In Production Engineering 7 (S. 639--645).

  8. 2012

    1. Heisel, U., Kushner, V., & Storchak, M. (2012). Effect of machining conditions on specific tangential forces. Prod. Eng. Res. Devel., 6(6), Article 6.
    2. Babichev, D. T., Storchak, M., & Babichev, D. A. (2012). Basic Conceptions of Tooth Work Surfaces Synthesis in Spur Gear that involved Intended Contact Durability. Modern Conference \dqMechanical Engineering. Science and Education\dq, 150--160.
    3. Krivoruchko, D. V., & Storchak, M. (2012). Temperature Field of Outer Chip Surface. Bulletin of National Technical University, 56--62.
    4. Krivosheya, A. V., Melnyk, V. E., Danilchenko, Y., Babichev, D. T., & Storchak, M. (2012). Features of direct and reverse forming involute cylindrical gear-wheels with the modified top of gear: Probleme mechanischer Antriebe (36). 36, Article 36.

  9. 2011

    1. Heisel, U., Pasternak, S., Storchak, M., & Solopova, O. (2011). Optimal configurations of the machine tool structure by means of neural networks. Prod. Eng. Res. Devel., 5(2), Article 2.
    2. Heisel, U., Storchak, M., Eberhard, P., & Gaugele, T. (2011). Experimental studies for verification of thermal effects in cutting. Prod. Eng. Res. Devel., 5(5), Article 5.
    3. Heisel, U., Strutinskiy, S., Sidorko, V. I., Filatov, Yu. D., & Storchak, M. (2011). Development of controllable spherical fluid friction hinges for exact spatial mechanisms. Prod. Eng. Res. Devel., 5(3), Article 3.
    4. Heisel, U., Storchak, M., & Stehle, T. (2011). Prozess-Maschine-Kopplungsmodell für das Zerspanen: Kopplungsmodell für die Simulation der Wechselwirkungsprozesse beim orthogonalen Zerspanen: Werkzeugmaschinen, Simulation. wt - Werkstattstechnik online, 101(1/2), Article 1/2.
    5. Heisel, U., Storchak, M., Stehle, T., & Korotkih, M. (2011). Studies of Temperatures in Cutting Zones. In Technical University Sofia (Hrsg.), TechSys2011.

  10. 2010

    1. Heisel, U., Krivoruchko, D. V., Storchak, M., Saloga, W. A., & Stehle, T. (2010). Verfahren zur experimentellen Bestimmung von Parametern für Reibungsmodelle beim Zerspanen. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105(12), Article 12.
    2. Heisel, U., Storchak, M., Krivoruchko, D. V., & Stehle, T. (2010). Temperaturbestimmung in den Zerspanzonen. wt - Werkstattstechnik online, 100(5), Article 5.
    3. Yashchuk, V. P., Filatov, A. Yu., Filatov, Yu. D., Monteil, G., Heisel, U., & Storchak, M. (2010). In situ control of roughness of surfaces at polishing by reflektometric method. 11th International Conference ``Optics and High Technology Material Science SPO 2010’’: Kyiv, Ukraine, 21. --24.10.2010, 185--187.
    4. Heisel, U., Pasternak, S., Storchak, M., Schaal, M., & Danilchenko, Y. (2010). Modellieren des Verzahnens mit Scheibenwerkzeugen: Simulation der kinematischen Prozessgrößen bei der Fertigung unterschiedlicher Verzahnungsprofile mit Scheibenfräser. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105(7–8), Article 7–8.
    5. Heisel, U., Storchak, M., & Stehle, T. (2010). Einfluss der Umgebungstemperatur beim orthogonalen Zerspanen. wt - Werkstattstechnik online, 100(1/2), Article 1/2.
    6. Heisel, U., Storchak, M., Krivoruchko, D. V., & Braun, S. (2010). Modeling of Interaction Processes in Cutting. 2nd International Conference Process Machine Interactions: June 10 - 11, 2010.
    7. Filatov, Yu. D., Filatov, O. Yu., Heisel, U., Storchak, M., & Monteil, G. (2010). In situ control of roughness of surfaces at polishing by reflektometric method. In C. Gorecki (Hrsg.), Optical micro- and nanometrology III (Bd. 7718, S. 77181J – 9). SPIE.
    8. Filatov, Yu. D., Filatov, O. Yu., Monteil, G., Heisel, U., & Storchak, M. (2010). Bound-abrasive grinding and polishing of surfaces of optical materials. In R. B. Johnson (Hrsg.), Current developments in lens design and optical engineering XI; and advances in thin film coatings VI (Bd. 7786, S. 776813--776819). SPIE.
    9. Filatov, Yu. D., Yashchuk, V. P., Filatov, A. Yu., Heisel, U., Storchak, M., & Monteil, G. (2010). Estimation of a roughness and reflective ability of surfaces of products from nonmetallic materials at finishing abrasive processing. Proceedings of 15th International Conference: April 8 -- 9 2010, Technologija Kaunas, 157--161.
    10. Storchak, M., & Stehle, T. (2010). Untersuchung der thermischen Wirkungen beim orthogonalen Zerspanen. In S. Braun, W. Maier, & S. Zirkelbach (Hrsg.), Intelligent produzieren (S. 275--295). Springer-Verlag Berlin Heidelberg.

  11. 2009

    1. Heisel, U., Storchak, M., Drozdenko, V. M., & Strutinski, V. B. (2009). Experimental Determination of Characteristics from Cutting Force Stochastic Vector by turning. Cutting and Tool in Technological Systems, 79, Article 79.
    2. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., Storchak, M., & Stehle, T. (2009). Thermomechanische Materialmodelle zur Modellierung von Zerspanprozessen. MM - Maschinenmarkt. Das IndustrieMagazin, 104(6), Article 6.
    3. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., Storchak, M., & Stehle, T. (2009). Thermomechanische Wechselwirkungen beim Zerspanen. Modellierung der Reibungsprozesse im Kontakt zwischen Werkzeug und Werkstück. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104(4), Article 4.
    4. Heisel, U., Pasternak, S., Storchak, M., & Stehle, T. (2009). Jede Verzahnung mit einem Werkzeug herstellbar. Fertigung von Zahnradprofilen für kleinere und mittlere Stückzahlen auf konventionellen Werkzeugmaschinen. dima - Die Maschine, 5, Article 5.
    5. Heisel, U., Storchak, M., & Stehle, T. (2009). The Consideration of Thermal Influence on Co-Simulation. Proceedings of International Conference Engineering, Technologies and Systems: Sofia Plovdiv Branch, 2009, 14, 11--16.
    6. Filatov, Yu. D., Sidorko, V. I., Filatov, A. Yu., Yashchuk, V. P., Heisel, U., & Storchak, M. (2009). Surface Quality Control in Diamond Abrasive Finishing: Optical Mesurement Systems for Industrial Inspection. VI. Proc. Of SPIE, 7389.
    7. Filatov, Yu. D., Sidorko, V. I., Filatov, A. Yu., Kovalev, S. V., Heisel, U., & Storchak, M. (2009). Surface Roughness in Diamond Abrasive Finishing. Journal of Superhard Materials, 31(3), Article 3.
    8. Kryvoruchko, D. V., Storchak, M., & Zaloha, V. A. (2009). Modeling of Cutting Processes. Modern Approach for Creation of New Technology. Metal Cutting, 4, Article 4.
    9. Heisel, U., Storchak, M., & Korotkih, M. (2009). Determination of Temperature in the Cutting Zones. Cutting and Tool in Technological Systems, 79, Article 79.
    10. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., Storchak, M., & Stehle, T. (2009). Bruchmodelle für die Modellierung von Zerspanprozessen. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104(5), Article 5.
    11. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., Storchak, M., & Stehle, T. (2009). Die FEM-Modellierung als moderner Ansatz zur Untersuchung von Zerspanprozessen: Teil 1. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104(7/8), Article 7/8.
    12. Heisel, U., & Storchak, M. (2009). Entwicklung der Modellbildung von Zerspanprozessen. In ISM (Hrsg.), Moderne Prozesse mechanischer Bearbeitung mit Diamant-und Hartmetallwerkzeugen und Oberflächenqualität von Maschinenteilen: Sammelband (Bd. 3G, S. 147--159).
    13. Filatov, Yu. D., Yashchuk, V. P., Filatov, A. Yu., Heisel, U., & Storchak, M. (2009). Assessment of Surface Roughness and Reflectance of Nonmetallic Products upon Diamond Abrasive Finishing. Journal of Superhard Materials, 31(5), Article 5.

  12. 2008

    1. Eberhard, P., Gaugele, T., Heisel, U., & Storchak, M. (2008). A Discrete Material Model Used in a Co-simulated Charpy Impact Test and for Heat Transfer. Proceeding of the 1st International Conference on Process Machine Interactions, 361--368.
    2. Heisel, U., & Storchak, M. (2008). Berücksichtigung der thermischen Einflüsse bei der Co-Simulation. Cutting and Tool in Technological Systems, 75, Article 75.
    3. Filatov, Yu. D., Sidorko, V. I., Filatov, A. Yu., Yashchuk, V. P., Prygodiuk, O., Poperenko, L. V., Heisel, U., & Storchak, M. (2008). Reflectometry of surfaces of non-metallic materials at polishing. IX International Young Scientists Conference ``Optics and High Technology Material Science’’: October 23 -- 26, 2008, Kyiv, 68--70.
    4. Heisel, U., Kryvoruchko, D. V., Zaloha, V. A., Storchak, M., Emelyanenko, S. S., & Selivonenko, S. N. (2008). Finite Element Analysis of Cutting Force Dynamics. Proceedings of the 11th CIRP Conference on Modeling of Machining Operations: 16 -- 18 September, 2008, 163--170.
    5. Filatov, Yu. D., Sidorko, V. I., Filatov, A. Yu., Yashchuk, V. P., Prygodiuk, O., Heisel, U., & Storchak, M. (2008). Reflectometry of Surfaces of Details from Nonmetal Materials at Finish Diamond-Abrasive Processing. Proceedings of the 13th International Conference ,,MECHANIKA 2008\dq: 3. -- 4. April 2008, 139--144.

  13. 2007

    1. Krivosheya, A. V., Danilchenko, Y., Storchak, M., & Pasternak, S. (2007). Forming of Gear Wheels of Different Classes by Initial Disks Forming Bodies. 8th International Symposium of Ukrainian Mechanical Engineers, 101.
    2. Krivosheya, A. V., Storchak, M., Danilchenko, Y., Krivosheya, V. V., & Pasternak, S. (2007). Estimation Procedure of Coupling Characteristics for Toothed Links on the design phase. Tool Safety and Optimisation of Technological Systems: Kramatorsk, 21, 248--254.
    3. Gaugele, T., Storchak, M., & Eberhard, P. (2007). Application of the Discrete Element Method to Model Cohesive Materials: Application of the Discrete Element Method to Model Cohesive Materials. PAMM Proceedings in Applied Mathematics and Mechanics.
    4. Heisel, U., & Storchak, M. (2007). Simulation Tool for Modeling of Interaction Process in Orthogonal Cutting. Cutting and Tool in Technological Systems, 73, Article 73.
    5. Heisel, U., Krivoruchko, D. V., Zaloha, W. A., & Storchak, M. (2007). Cause Analysis of Errors in FE Prediction of Orthogonal Cutting Performances. 10th CIRP International Workshop on Modeling of Machining Operations, 141--148.
    6. Krivosheya, A. V., Storchak, M., Danilchenko, Y., Krivosheya, V. V., & Pasternak, S. (2007). Forming of Gear with Disks Bodies. High technologies in Machine-Building: Kharkiv, 2007, 2, 120--133.

  14. 2003

    1. Heisel, U., Storchak, M., & Eisseler, R. (2003). Determinationen of Cutting Parameters in Deep Hole Drilling with Single-Fluted Gun Drills of Smallest Diameters. Annals of the German Academic Society for Production Engineering, X(1), Article 1.

  15. 2001

    1. Heisel, U., Storchak, M., Stehle, T., & Eisseler, R. (2001). Optimierung der Bearbeitungsparameter beim Tieflochbohren mit Einlippenwerkzeugen kleinster Durchmesser. In K. Weinert (Hrsg.), Spanende Fertigung (S. 91--100). Vulkan-Verlag.
    2. Heisel, U., Storchak, M., & Eisseler, R. (2001). Optimisation of deep hole drilling processes with smallest diameters. 10th International Conference on Precision Engineering (ICPE): Yokohama, Japan, 18-20st July 2000, 157--163.
Zum Seitenanfang